Testeur de tension de surface d'huile de transformateur UHV-670
Le testeur automatique de tension interfaciale d'huile UHV-670 est un instrument permettant de tester la valeur de tension interfaciale de surface d'huile ou de liquide. Mesurer la tension superficielle de divers liquides (interface liquide-gaz) et la tension interfaciale de l'huile minérale et de l'eau (interface liquide-liquide)
Détails du produit du testeur de tension de surface d'huile de transformateur UHV-670
Product Introduction:
The Automatic Interfacial Tension Tester is designed to measure both the surface tension of liquids (at liquid-gas interfaces) and the interfacial tension between mineral oil and water (at liquid-liquid interfaces), in full compliance with the GB6541-86 standard — "Method for Determination of Oil-Water Interfacial Tension of Petroleum Products" (Ring Method).
Featuring a color touch screen display and clearly labeled Chinese menu prompts, the instrument offers a highly automated and reliable testing process with excellent repeatability. Operation is extremely simple: after powering on, all tests can be easily completed by following the intuitive on-screen menu instructions.
paramètres techniques
Plage de mesure
2～200 millinewtons/m
Sensibilité
0,1 millinewton/mètre
Précision
0,1 millinewton/mètre
Résolution
0,01 millinewton/m
Répétabilité
0.3%
Température applicable
10～30℃ (typical value: 25℃)
Humidité applicable
(20～75)﹪RH
Source de courant
AC 220V±5% 50Hz
Pouvoir
20VA
Dimensions
185×260×360 (mm)
Poids
15 kg
Product Features:
1. Intuitive Operation: Equipped with a color touchscreen and clearly labeled menu buttons with full Chinese prompts, ensuring an easy-to-navigate user interface.
2. Highly Reliable Performance: Designed with advanced automation for consistent and dependable operation, delivering excellent repeatability across tests with minimal user effort.
3. Streamlined Testing Process: Simply power on the instrument and follow the on-screen prompts to complete all measurements — no complex setup or training required.
Working principle:
The working principle of the instrument is to apply the high-frequency induction micro-displacement automatic balance measurement systemto the torsion balance,that is, when the force acting on the platinum ring changes, the balance bar connected with the platinum ring is in the two eddy current probes Displacement occurs in the two eddy current probes, causing the differential transformer to lose balance, and the input signal of the differential amplifier in the circuit also loses balance. After being amplified by the amplifier, the output is amplified by the platinum ring. The electric signal that changes with the force, this signal is sent to the microprocessor for processing, and the actual tension of the tested sample is automatically calculated according to the international GB6541.
Bâtiment 6, parc industriel optique-mécanique d'Optics Valley, 84 Gaoxin 5 Road, Zone de développement de nouvelles technologies d'East Lake, ville de Wuhan, province du Hubei, Chine
